Double Glazing Seal Repairs
When double glazing window seals break this can lead to damp and mould. This could cause damage to the frame as well as the walls surrounding it, in addition to affecting your health.
Resealing is a cost-effective method to repair most uPVC window frames rather than replacing them. A glazier is usually able to clean the frame of the window and the glass and apply a fresh layer of sealant, and smooth it.
Water Leaks
Window seals are made to prevent moisture to stay out of your home. However, when they begin to wear down, it could cause water leaks around your windows. A window that leaks isn't only a nuisance but can cause serious damage to the structure of your home. It is essential to recognize a problem early and have it repaired by an expert before it gets worse.
Often, the source of the windows that leak isn't in the glass itself but rather on the frame and sill. A leak in this area is the most common sign of a failed window seal. It could be due to damage to the seal due to weather or age or worn caulking or even a blocked drain section that results in the accumulation of ice or water.
Another common sign of a failing window seal is the appearance of water between the panes of double-glazed windows. This is not as dangerous as a leak of water as the water does not travel as far to get into your home. However, it does mean that the inert gas sandwiched between the panes has lost its lubrication, which will lower the insulating value of your windows.
The final indication of a failing window seal is condensation between the panes. This could be due to a failed seal or a damp environment within your home. It could also be a problem with the glass. It's not just a nuisance however, the condensation could lead to mould and mildew growth within your home. It can be very difficult and costly.
It's time for you to examine your double-glazed windows when you observe these indications. Repairs or replacements will aid in preventing your home from water leaks, lower energy costs, and even keep out draughts. It's a small expense to ensure your family's comfort and safety. Contact Thompson Creek Window today to discuss your options regarding a window seal repair or replacement. Our experienced professionals are happy to assist! We provide assistance to homeowners throughout the Mid-Atlantic.
Condensation
A broken double-glazing seal may allow water to enter the insulating space. The water could cause condensation in the window panes and may cause fogging or misting.
If you notice condensation inside your home you should contact a double glazing repair service. Condensation could indicate that the vacuum seal installed by the factory failed and water has gotten into the insulation.
Condensation can be caused by a variety of causes, but it's typically the result of gaskets that are not properly fitted and sealants, as well as insulation within the uPVC frame of the windows. As a result there are different double glazing seal repair options, however it is crucial that the new seal is properly sized to ensure an ideal fit and a water-tight seal.
Typically, the gaskets that are used to fill in the gaps between double-glazed units are made from polyurethane foam. They are designed to last a long time however, they may degrade over time due to wear and tear and exposure to various temperatures and weather conditions throughout the year.
Over time the foam will shrink or crack over time. This can cause cracks in your seal, allowing moisture to get into the double-glazed window. This not only creates condensation, but it could also result in an increase in energy efficiency, which means that you're losing heat from your home to the outside air.
Re-sealing the windows is one way to fix this problem. This isn't a 100% solution as it will eliminate the condensation that is already present and not address the root issues that are causing the double-glazed windows to leak or develop condensate.
Another solution is to have your windows replaced completely and this should be done by a professional that offers an insurance-backed guarantee. This means that if the company fails or goes bust you will still be covered by the insurance. It is important to remember that replacement windows must have a warranty of at minimum 10 years.
Misting
As autumn draws nearer it's a good idea to check that your double glazing seals are in good working order. Worn-out window seals don't just affect the insulation properties of your windows, but can also cause condensation, mold and damp. To prevent further damage to your double-glazed windows and save money on energy bills, it's important to repair any issues as soon as you can.
Double-glazed windows are made of two panes glass that are joined by a gas-filled internal space. The sealant layer on the outside fills the gap between uPVC frames and the glass. This is essential to maintain the air-tight seal which keeps cold and warm air separated in your home, saving you money on your heating bills. Unfortunately, over time these seals may fail due to age, weather conditions or even inadequate installation. The magic insulation formula which makes double-glazed windows so efficient could begin to deteriorate once this occurs.
If the seals are damaged or defective and aren't repaired they can cause dampness and condensation, which could affect your health as well as the appearance of your window. Damp and mould not only cause damage to your walls, floors and ceilings, but also cause irritants and allergens within your home that could be harmful to you and your family's health.
The most frequent issue with double glazing is misting that occurs between the panes. This happens when moisture gets inside the insulated section of your windows. It isn't easy to fix without professional double-glazing repair.
There are DIY methods of tackling this issue, but we'd recommend against this as it's not only risky but also very dirty and damage your windows. These methods involve drilling holes in the glass units and applying chemicals to eliminate the fog & condensation. This could lead to a number of complications and, in particular, expose your windows to water damage that could cause the entire unit to be destroyed.
Professional glaziers have the expertise, tools and experience to properly seal your uPVC frames and give you long-lasting results. Additionally they can also give advice on the best ways to keep your windows in good condition to prevent future problems.
Draughts
A draught from your window is an indication that the sealant has probably broken down and needs to be replaced or repaired. This will block cold air from getting into your home. window repairs Woking will also improve energy efficiency, lower heating costs, and improve the comfort.
It is also important to remember that not all draughts originate from window seals but from the gap between the frame and the bricks. In some cases it may be possible to correct this by caulking the gap. However, if this is not successful it will need to be resealed professionally.
If the sealant around double-glazed windows begins to fail and allows water to infiltrate. This can result in dampness or even mold. This could have a negative effect on health and can cause damage to property. If you observe any issues with water ingress and you want to take action as soon as possible. If your windows are still covered by a guarantee, it's worth checking to see if the company that sold them will pay for the cost.
It is important to determine if the windows are covered by a warranty. Certain companies offer lifetime guarantees and others offer 10 years. If your double-glazed windows are covered by a warranty, you should consider calling the company you bought them from as soon as possible and providing them with the details of any issues you are experiencing. The ideal approach is to make this contact in person or via mail or email, to ensure that all information is documented and clear.
Also, it is important to note that draughts are usually caused by defective hinges, and not due to the lack of seals that are effective. The hinges are located close to the window sash which is the one that you open. If they are not regularly oiling them, they can become stiff. This could cause a gap be created between the sash frame and the sash, which lets cold air into the house. This issue can be resolved by replacing these hinges without impacting window seals.